Go a Step Further With Protecting Painted Surfaces
Go a step further in protecting your equipment with Paint Pro XD. We recommend using Paint Pro XD to coat all plastic trim, textured black fenders, fuel tanks, grills, exhaust stacks and lights. You can also use it for all your off-road toys. This product can be used on paint with the same finish results as Paint Pro, but the use rate is higher. If there are painted surfaces that need additional protection then we recommend turning to Paint Pro XD.
- Weather protection
- 9H hardness provides scuff and scratch resistance
- Protection against water, corrosion, oxidation and UV rays
- Unmatched gloss and shine
- Superslick surface makes cleanup easy
- Easy application
Application
Wash the surface, then completely dry. Clean all surfaces with a high-quality microfiber towel and a 50/50 isopropyl alcohol and distilled water mixture. Pour a small amount of T&T Protect Paint Pro XD onto the applicator pad and work in small sections or panels, applying the coating quickly and evenly. Allow the product to sit for 30-45 seconds, then gently buff off using new, high-quality microfiber towels.
After coating, applied surfaces should remain dry for 2-3 days. Avoid water during this time and avoid washing new coatings for 14 days.
Nitrile gloves should be worn. A respirator is recommended for applications in closed or poorly ventilated areas.
+1 (403) 786-9933
120 – 27211 Highway 12, Lacombe County, AB T4L 0E3