Protecting Your Glass Surfaces
Ensuring the glass on your equipment is protected is important to prevent scratches and to make it easier to clean. T&T Protect Glass is formulated specifically for windshields, windscreens, windows, mirrors, and glass headlamps.
We only recommend using Glass Pro on actual glass. It is specially formulated to bond with glass, and when it is fully cured, it creates a repellent surface and is easier to clean. For in-field cleaning, we recommend using a California Duster to clean the dust off the glass at the end of every workday.
- Protects windshields from micro scratches
- Water repellent effect
- Increased visibility
- Speeds up winter de-icing
- Cleaning insect splatter is a breeze
- Easy application in just a few short minutes
- Long-lasting protection - up to 2 full years depending on environmental and care factors
Application
Wash the surface, then completely dry. Clean all surfaces with a high-quality microfiber towel and a 50/50 isopropyl alcohol and distilled water mixture. Pour a small amount of T&T Protect Glass Pro onto the applicator pad and work in small sections, applying the coating quickly and evenly. Keep the area wet for 1 minute and do not allow it to dry. Don't allow the product to dry on the glass. If the surface begins to dry before 1 minute is up, apply additional product as needed. After 1 minute of application, gently buff off using new, high-quality microfiber towels.
After coating, applied surfaces should remain dry for 24 hrs. The coating will harden over 2-3 days. Avoid water during this time. Avoid washing new coatings for 14 days.
Nitrile gloves should be worn. A respirator is recommended for applications in closed or poorly ventilated areas. T&T Protect Glass Pro should be used within 3 days of opening.
+1 (403) 786-9933
120 – 27211 Highway 12, Lacombe County, AB T4L 0E3